340gsm Mesh
Ideal for building wraps and very large banners
 |  |  |
Material Overview
- Printed on fine 340gsm PVC Mesh
- 25% Air-flow through
- Offers enhanced image compared to other mesh
- Standard finishing included (see below)
- Printed with fade-proof inks
Each banner is printed and finished to your requirements.
Our 340gsm Mesh PVC material is ideal for use on scaffolding or large building wraps.
The mesh banner material is 25% open to allow air to pass through creating less stress on the banner itself. The mesh also allows a certain amount of light through so that when used on buildings, windows are not left completely darkened.
Mesh is lighter than standard banner material which means it could be more suited where weight is an issue, such as installation or the protection of the surface it is being fixed to.
Uses for 340gsm Mesh
- Scaffolding and very large banners
- Medium and large-format advertising
- Building wraps (banners that can cover building sides)
- Heras fencing banners
340gsm Mesh is perfect for building displays where size is important and weight could be an issue.
Finishes for 340gsm Mesh
-
Welded Hems & Eyelets
Items will be hemmed, then eyeletted at equal distributions along the hem.
The standard distribution of eyelets is one per metre. If you require a different distribution or specific placement of eyelets, that is no problem at all - simply let us know what you need when you place your order.
-
Stitched Hems & Eyelets
Graphics will be given a stitched hem, then eyeletted at equal distributions along the hem. Eyelets are clear plastic.
The standard distribution of eyelets is one per metre. If you require a different distribution or specific placement of eyelets, that is no problem at all - simply let us know what you need when you place your order.
There is no charge for this finish.
-
Welded Hems Only
Items will be given a welded hem.
-
Stitched Hems Only
Graphics will be given a stitched hem.
There is no charge for this finish.
-
Stitched Hems with Velcro
Graphics will be stitched to a strip of either hook or loop edging. Please specify which is required when ordering.
A variety of widths are available - please contact us to discuss your requirements.
Black or white strips are available. Our sewists will choose the most appropraite colour to complement your graphic, unless specifically requested.
There is an additional charge for this finish.
-
Pole Pocket(s)
A pocket is added to the edges you require to allow a pole to pass through and support/tension the banner.
The diameter of the pocket can be specified by you, however, if you let us know the diameter of the object to go into the pole pocket we can calculate the size of the pocket for you.
-
Trimmed to Size
Items will be cut to the size ordered.
-
Trimmed With Eyelets
Same as Trimmed to Size but with the addition of eyelets.
